|
Remote Booster Washer Pump WEP01
|
|
Remote or Bracket mounted washer pump. 12V This pump produces three times the volume of the original OE pump. We have tested it!
No need to remove the OE pump. Just swap the pipes around, bridging the OE motor connections with the short undercap pipe and take the downpipe directly to the elbow and connect to the remote pump as shown.
Mount the remote pump behind the strut tower on the inner wing.
You can even paint it body colour. You can also leave the original pump wired up (with a broken connection). This then preserves your OE pump but gives you a full power jet to the windows.
You can also mount the pump directly on the bottle cap with blind rivets or 2BA machine screws. For this arrangement you may need a new cap without a large centre hole. See 24G6271LP
Please note do not split cut old pipes off, as the cut will spoil the edge seal of the spigot. Warm up with a low setting on a hot air gun or boiled water to soften pipe ends. Then pull or push gripping with a cloth. Liquid soap can be used as a lubricant.
|
|